•hexahedral

hexahedral 发音

英：[ˌheksəˈhidrəl]　　美：[ˌheksəˈhiːdrəl]

英：　　美：

hexahedral 中文意思翻译

hexahedral 相似词语短语

1、hexameral ─── 六角体

2、hemihedral ─── adj.（晶体）半面的，半面形的

3、decahedral ─── adj.十面体的；有十面的

4、hexahedrons ─── n.[数]六面体

5、heptahedral ─── 七面体

6、hexahydrate ─── n.六水合物

7、hexametral ─── 六边形

8、hexahedron ─── n.[数]六面体

9、hexahedra ─── 六面体（hexahedron的复数）

hexahedral 常见例句（双语使用场景）

1、Research Progress in Mesh Generation Hexahedral Finite Element ─── 六面体有限元网格生成方法综述

2、arbitrary collocated hexahedron grids ─── 任意六面体同位网格

3、Based on the meshing equations of bevel gears, using the method of setting solid model by bottom-up and 8-nodes element of hexahedron, its finite element 3D model of three gear tooth is set up. ─── 根据螺旋锥齿轮啮合方程，采用“自底向上”的实体建模方法和八节点六面体等参元，建立其三齿的有限元分析3D模型；

4、Keywords Programmable logic controller;Hexahedral head hydro-machine;Controlling circuit;Software design; ─── 可编程序控制器;六面顶液压机;控制线路;软件设计;

5、Keywords BN fiber;hexahedron phase;tensile strength; ─── BN纤维;六方相;抗张强度;

6、Keywords hexahedron type isolator;experimentation of dynamic and static characteristic;data batch processing; ─── 六面体隔振器;静、动态试验;试验数据批处理;

7、cube is consisted of 8 colorful cubes. ─── 魔方是由8个色彩艳丽的立体魔方组成。

8、Harappan engineers followed the decimal division of measurement for all practical purposes, including the measurement of mass as revealed by their hexahedron weights. ─── 哈拉帕的工程师沿用着十进制的刻度划分。实际上，包括质量的测量，都是通过他们的六面体法码而表现。

9、The Relationship Between Angles and Errors at Angle(Edge) Dropping Test of a Packaged Hexahedron and Their Controlling Method ─── 包装六面体角(棱)跌落时各跌落角误差的关系及控制方法

10、Generation of finite element hexahedral mesh and its trend of development ─── 有限元六面体网格的典型生成方法及发展趋势

11、Calculation for equivalent loads of prestress in hexahedron element ─── 六面体单元下预应力等代荷载计算

12、downpour hexahedron ─── 待垮六面体

13、We can now use tetrahedron and hexahedron elements in three-dimensional stress analysis ─── 我们现在在三维应力分析中采用四面体单元和六面体单元。

14、Visualization of section for three-dimensional FEM analysis with hexahedral elements ─── 基于任意六面体单元数据场的剖面可视化算法

15、As for the square and regular hexahedron arrays, there are five items in x direction and nine items in y direction which are forty five items at whole. ─── 本文结果显示第一种是漏斗型集光器，可以改变漏斗型集光器内部材质来提升光通量;

16、Accordingly, a technique for automatic hexahedron mesh of rock-mass with complex structure was realized using multiply mapping mesh. ─── 在此基础上，利用多重映射网格，实现了复杂构造岩体六面体网格剖分；

17、This paper deduced a generalized formula for calculating theelectrostatic disturbance torque of gimbaled electrostatically suspended gyro(ESG)with regular hexahedron electrodes arrangement. ─── 本文推导了正六面体电极分布的常平架静电陀螺仪电场干扰力矩计算的一般公式。

18、Design of the Die for Forming the Hexahedron Block by a Single Drawing ─── 六方料一次拉拔成型模设计

19、Hexahedral structure makes it looks like a pagoda. ─── 六面体结构，形似宝塔，似有塔灯之感。

20、Abstract Isoparametric element of arbitrary hexahedron plays an important role in finite element analysis. ─── 内容摘要 等参数任意六面体单元在有限元分析中有着重要的作用。

21、Shih,Bih-Yaw,1997, “Automatic Hexahedral Mesh Generation”,Ph,D Dissertation, Colrado State University. ─── 施弼耀、陈国雄、刘仁俊、陈昭蓉、杨恭娟和邱郁文，民92年，”管理资讯系统”，沧海书局。

22、A method for creating contour line in 3D 8 noded hexahedral elements is presented. ─── 提出了一种八节点六面体单元的三维场量等值线生成方法。

23、Keywords three-dimensional FEM;hexahedral element;section;visualization;contour;color contour image; ─── 三维有限元;六面体单元;剖面;可视化;等值线;云图;

24、An iterative algorithm of inverse isoparametric mapping for hexahedral elements ─── 六面体单元等参逆变换的一种迭代解法

25、In this paper, an automatic hexahedron mesh generation method based on the advancing front method is described for the multi-medium 3D complicated domain. ─── 使用自适应有限单元法在三维复杂域内求解水工及岩土工程问题，讨论了应用行波法在多介质三维复杂块体内六面体单元网格的自动生成过程。

26、Appearance Design Patent----supply sample with complete external shape, or hexahedral picture or photo which meet requirement. ─── 外观设计专利——提供有完整外形的实物、或者符合要求的六面图或照片。

27、Based on viscosity damping hourglass control method, a one-point integrational hexahedral finite element dynamic explicit algorithm was developed and ironing process simulation was also carried out. ─── 摘要采用黏性阻尼沙漏控制算法，开发了单点积分的八节点六面体单元的有限元动力显式算法程序，用于模拟厚钣金件的变薄拉深成形过程。

28、A Modal Experimental Investigation of Hexahedron Flexible Multi-body Truss ─── 六面体柔性桁架多体结构的模态测试实验研究

29、Smallest outer-contained parallel hexahedron and the smallest outer-contained cylinder ─── 最小外包容平行六面体和最小外包容圆柱

30、Hexahedral mesh generation algorithm of swept volume ─── 扫掠体六面体网格生成算法研究

31、We are OK an enclosed bedroom space regard as one hexahedral. ─── 我们可以把封闭式的卧室空间看做一个六面体。

32、Hexahedral structure makes it looks like a pagoda. ─── 六面体结构，形似宝塔，似有塔灯之感。

33、This paper tries to generalize the throwing objects from the one dimension pin to the convex curve in two dimension,and even the three dimensional regular tetrahedron and regular hexahedron. ─── 在蒲丰投针问题的基础上,把投掷物由一维的针推广到二维的凸曲线,三维的正四面体、正六面体;

34、In this paper,strain and stiffness matrix of isoparametric element with eight nodes and hexahedron are derived in detail. ─── 推导了八节点六面体等参单元的应变矩阵、刚度矩阵,对该单元的位移解收敛性和畸变敏感性进行了分析。

35、On the basis of the hexahedral mesh generation method, the ring cross-section grid is achieved through the border node method. ─── 在六面体单元网格生成方法的基础上，采用边界节点法实现了环件截面网格剖分；

36、hexahedron phase ─── 六方相

37、tetrakis hexahedron ─── 四重六面体

38、Based on method of HR, refinement of hexahedral finite element mesh is realized by APDL program. ─── 并利用分级剖分法(HR)，通过APDL编程实现接触区域六面体网格的细化。

39、APPLICATION AND DISCUSSION OF THREE DIMENSIONAL NUMERICAL MANIFOLD METHOD BASED ON HEXAHEDRON ELEMENT ─── 基于六面体覆盖的三维数值流形方法的理论探讨与应用

40、Research on Visualization of Arbitrary Hexahedron Elements Data ─── 基于任意六面体单元数据场的可视化研究

41、Research and Application of the Interpolatory Volumetric Subdivision Scheme over Hexahedral Lattice ─── 六面体插值体细分方法研究与应用

42、Numerical Simulation of Wind Fields around Buildings Using Arbitrary Collocated Hexahedron Grids ─── 建筑风场任意六面体同位网格系统的数值模拟

43、A method for creating contour line in 3D 8 noded hexahedral elements is presented. ─── 提出了一种八节点六面体单元的三维场量等值线生成方法。

44、a new model was created by using hexahedral elements, mapping the node temperature and the equivalent plastic strain on the integration points. ─── 利用六面体单元构建有限元分析模型，映射单元节点的温度、积分点的等效塑性应变，进行数值分析。

45、We are OK an enclosed bedroom space regard as one hexahedral. ─── 我们可以把封闭式的卧室空间看做一个六面体。

46、This hexahedral included end face, all around establish face and underside 6 place. ─── 这个六面体包括了顶面、四面的立面和底面六个部位。

47、hexahedron synthetic diamond press ─── 六面顶金刚石压机

48、Three-dimensional Numerical Simulation of Flows in Catalytic Converter with Complex Type Using Hexahedral Mesh ─── 六面体网格下复杂型转化器的三维数值模拟

49、regular hexahedron group ─── 正六面体群

50、As full hexahedron mesh generation is one of difficulties of mesh generation methods, it's signal to realize full hexahedron mesh generation. ─── 另外,全六面体网格划分一直是有限元网格划分中的难点之一,实现开孔构件的全六面体网格划分具有重要的现实意义。

51、Keywords Hexahedral mesh Surface element layer Finite element simulation Material forming process; ─── 六面体网格;表层网格法;有限元模拟;材料成形;

52、A Hexahedron Generalized Conforming Element with High Accuracy ─── 一种高精度六面体广义协调元

53、Special type non-standard products: Rectangle type and hexahedron type of hard alloy products and tungsten base high specific alloy products for military application. ─── 异型非标产品系列：合金长条、六方块、军工用钨基高比重合金制品等。

54、hexahedral element mesh ─── 六面体网格

55、Keywords finite element method;hexahedral mesh;grid-based method;surface element layer;remeshing;numerical simulation of metal forming process; ─── 有限元法;六面体网格;栅格法;表层网格法;网格再划分;体积成形过程模拟;

56、Based on the cross-section grid, the ring hexahedral element is generated by swept method, and the elements and the nodes treated. ─── 依据剖分的截面网格利用扫掠法实现了环件六面体单元的网格生成并对单元和节点进行重排；

57、When using this technique in the finite element simulation of rectangular solid upsetting, the hexahedron remeshing problems are solved well. ─── 将该技术应用于矩形块体镦粗过程的有限元模拟中，较好地解决了六面体网格重划问题。

58、hexahedral volume coordinate method ─── 六面体体积坐标

59、hexahedral bar ─── 六角钢

60、IMPROVEMENT AND APPLICATION OF CURVILINEAR HEXAHEDRAL EDGE ELEMENTS ─── 曲边六面体矢量单元的改进与应用

61、For the planes (100) and (111) of two hexahedral and octahedral diamonds, the direction of the diamond during the conditioning is mainly a relatively contributed factor. ─── (100)面与(111)面在六面体与八面体钻石上之比较，刮擦方向为粗糙度望目值的较大贡献因子。

62、a hexahedron with six equal squares as faces. ─── 有六个相等的正方形面的六面体。

63、The outer-contained parallel hexahedron smaller then that in the now existing document is presented according to the given point series, and the definition and solution model of smallest outer-contained cylinder are introduced. ─── 摘要根据已给点列，给出了比现有文献更小的外包容平行六面体，并引进了最小外包容圆柱的定义、求解模型。

64、Keywords BN fiber;hexahedron;tensile strength; ─── 关键词BN纤维;六方相;抗张强度;

65、A Parallel Algorithm Determining Topological Relation Between Cells for Hexahedral Grid in Aerodynamic Analogy ─── 流体力学数值计算中建立六面体网格拓扑关系的并行算法

66、Abstract: Body-fitted hexahedron grid was obtained of high speed train head surface based on mapping approach. ─── 摘 要： 利用映射法生成高速列车头部流场的六面体贴体网格。

67、2 Novel air conditioned hexahedron cab having wide horizon，damping seal driving comfort and good look. ─── 2、整机造型美观，更具时代感，新颖的弧型六面体空调驾驶室，视野开阔，密封性能好。

68、Transitional-zone method in hexahedral finite element meshing in geotechnical engineering ─── 岩土工程数值分析中的过渡区方法

69、We can rate enclosed bedroom space hexahedral. ─── 我们可以把封闭式的卧室空间看作一个六面体。

70、Keywords hexahedral element;remeshing;surface offset;numerical simulation;rigid plastic finite element method; ─── 六面体单元;网格再划分;曲面偏置;数值模拟;刚塑性有限元法;

71、two and a half dimensiona hexahedral meshing ─── 2.5维六面体网格划分

72、hexahedral element ─── 六面体单元

73、hexahedron element with 9 nodes ─── 六面体9节点单元

74、AUTOMATIC GENERATION AND REGENERATION ALGORITHM OF HEXAHEDRAL MESH ─── 六面体网格自动划分和再划分算法

75、cube hexahedron ─── 正六面体

76、This dissertation take the artificial diamond hexahedron press synthesizes PDC as the experimental object, has researched and developed measure system of PDC temperature field. ─── 本文以生产金刚石复合片的人造金刚石六面顶压机为对象，研制了金刚石复合片温度场测量系统。

77、hexahedron virus ─── 六面体病毒

78、a regular hexahedron ─── 六面体

79、Keywords Hexahedral mesh Subregion 3D solid Finite element; ─── 六面体网格;子区域;三维实体;有限元;

80、A program HEXCV for three dimensional resin flow process was developed based on the hexahedral element with the finite element/control volume method (FE/CVM). ─── 基于六面体单元,采用有限单元/控制体积方法,开发了三维树脂流动过程模拟程序HEXCV。

81、Generating method of surface contour lines of eight-node hexahedron element in three dimensional FEM numeric simulation ─── 基于六面体八节点单元的三维有限元数值模拟表面等值线的生成算法

82、Keywords bulk metal forming;numerical simulation;finite element method;hexahedral element;remeshing;distorted mesh;mesh refinement; ─── 塑性成形;数值模拟;有限元法;六面体单元;网格再划分;畸变网格;质量优化;

83、ZHANG Chong-wen,GUI Guo-qing.Establishment of a three-dimensional hexahedral finite dynamic e1ement and its theoretical deduction[J].Journal of Vibration Engineering,1991,4(3):60-65. ─── [6]张崇文,桂国庆.三维动态八结点有限元的建立及理论推导[J].振动工程学报,1991,4(3):60-65.

84、Keywords hexahedral mesh;core mesh;boundary fitting;surface element layer;optimization; ─── 六面体网格;栅格法;核心网格;包络表面;网格优化;

85、Keywords arbitrary hexahedron collocated grids;dislocation corrections;finite volume method;SIMPLE algorithm;building wind field; ─── 任意六面体同位网格;错位修正;有限体积法;SIMPLE算法;建筑风场;

86、WANG Lei,LIU Han-bing,GAO Yi-ping,et al.Assembly Algorithm of Hexahedral Meshes Generation for Thin Wainscot Structure[J].China Journal of Highway and Transport,2005,18(1):51-56. ─── [8]王磊,刘寒冰,高一平,等.薄壁杆件六面体网格剖分的组装法[J].中国公路学报,2005,18(1):51-56.

87、Induced Permutation Group's Rotation Index of Rotation Group of Cube Hexahedron ─── 正六面体的旋转群导出的点边面置换群的轮换指标

88、A kind of complete automatic subdivision method for mesh of hexahedron based on quadratic subdivision of tetrahedron was put forward and the corresponding program was developed. ─── 摘要提出了一种基于四面体二次剖分的六面体网格全自动剖分方法，研制了相应的程序。